11
Assembly— Hanging the Fan (continued)
Black
White
Yellow/Green
Blue
White
White
Black
Black
Blue
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge
or experience, contact a licensed electrician.
!
7. Making the electrical connections
!
WARNING: Check to gee that all connections are tight,
including ground,and that no bare wire is visible at the
connect Terminal blocks, except for the ground wire.
!
CAUTION: Do not use with a wall light dimmer switch
NOTE: The fan must be installed at a maximum distance of
20 ft from the remote control for proper signal transmission
between the remote control and the fan's receiving unit.
Yellow/Green
Neutral Wire for Fan
Live Wire for fan
Live Wire for Lamp Control
Yellow/Green
Terminal blocks
Ground wire
Ground wire
Antennd wire
L
N
Motor to receiver electrical connections:
1. Connect the fan wire with receiver wire by connect terminal. Receiver to house supply wires
electrical connections:
1. Connect the receiver white wire marked "AC in N" to the household white wire (neutral) using
a wire terminal block.
2. Connect the receiver Black wire marked "AC in L" to the household Black wire (hot) using a
wire terminal block.
3. Connect the fan wire and the ground wire on the hanger through the terminal block.
4. Use the terminal block to connect the ground wire on the mounting bracket to the household
ground wire.
