Wansview Q1 User Manual Download Page 42

Page: 42 / 55

5.3.2.6 Other Setting

1) OSD setting

On the OSD setting,

users can set up the

Overlay name and

Overlay time, so user can

check name and time on

the video screen.

If Overlay name and

Overlay time and

Display temperature and

humidity are checked at

the same, the Device

name will show

Temperature and Humidity.

Note: The temperature and humidity are unavailable on this model.

2) Audio

User can adjust the

power frequency, Power

frequencies include:

50HZ(220V voltage

selects 50HZ),

60HZ(110V voltage

selects 60HZ), 60HZ

used in Japan, Canada et

3) AC Frequency

User can adjust the

power frequency, Power

frequencies include:

50HZ(220V voltage

selects 50HZ),

60HZ(110V voltage

selects 60HZ), 60HZ

used in Japan, Canada

4) Maintenance

User can reboot and

reset (restore) the

camera.

Tips: To reset the

camera, the camera will

restore to factory

setting.

www.wansview.com

Summary of Contents for Q1
























































Search results

Summary of Contents for Q1

Reviews:

Related manuals for Q1

Brands by name

Popular brands

Wansview Q1, User Manual

Search results

Summary of Contents for Q1

Reviews:

Related manuals for Q1

Brands by name

Popular brands