Installation
1.5 Control Panel
1.5.1 Main Display
Extruder Temperature:
(Current °C / Set °C)
Print Bed Temperature:
(Current °C / Set °C)
Extruder Co-ordinates:
X, Y, and Z (mm)
Mul:
Displays current speed multiplier. Default value is 100%
Buf:
Displays current GCODE steps in the buffer
Message Display:
• Printer Ready:
Printer is initiated and awaiting input
• Idle:
Printer currently in idle state
• Stepper Disabled:
Motors are disabled and free to be moved by hand
• Preheat PLA / Preheat ABS:
Extruder and bed temperatures set and active
• Printing…:
3D Object is being printed, % displayed
Printing Time:
Total time spent printing
Filament Printed:
Total length of filament fed through the Extruder in metres
1.5.2 Menu Map
Quick Settings:
• Home All:
Returns Extruder and bed to home position using stop switches
• Speed Mul.:
Default 100%. Motor speed multiplier. Speed of the motor is
multiplied by this rate
• Flow Mul.:
Default 100%. Printer flow multiplier. Amount of filament extruded is
multiplied by this rate
• Preheat PLA:
Sets Extruder to 215°C and Heated Print Bed to 60°C
• Preheat ABS:
Sets Extruder to 245°C and Heated Print Bed to 90°C
• Cooldown:
Sets Extruder and Heated Print Bed to 0°C
• Disable Stepper:
Disables all motors so they are free to be moved by hand
AFTER SALES SUPPORT
86-571-23290996
Model : Duplicator I3 V2
23
