Wanhao I3 unboxing and hardware set up. Rev.D
10
/
10
Run Experience.
REV.B. changes
1.
Adding the damper pad.
2.
Folding packing.
REV.C
1.
Delete: Gently pull The Duplicator i3 out of its packaging and place it on your work surface.2.4.
2.
Add: take off secure sticker on the switch and wing nuts.
3.
Add: Connect end stop switch to socket ,For prior printer you may need to install,switch
directly onto it’s position.
Rev.D
1.Add pic of Z axis end stop switch.
