Wanhao I3 unboxing and hardware set up. Rev.D
8
/
10
Almost finished! Check your Power Supply power switch. There are 2
voltage option,
110V and
220V
. Make sure you are setting the switch at right voltage according to your local power supply
voltage. 4.6 Note:this is a 2 voltage Power Supply Unit which can accept 110V and 240 V ,AC at
50/60 hz. It also has a standard IEC cable input to accept international cable types if you’re out
side the China. Next, plug the cable into the Power Supply socket, next to the power switch.
4.7Before connecting anything, make sure that the Duplicator i3 power switch is in the OFF
position and the switch is at right voltage of your local area.
To protect the motor cable from damage during shipping, we have unplug the Z axis and X axis
motor cable connector. You need to insert the connector into the socket when you start. The
longest cable is for X axis. And the other 2 male connectors quite near the female connector are
for Z axis motor. Just insert them.
