64
W&T
IP-Watcher 2x2 Digital PoE
The units are in 1/1000 seconds. If no value is entered here,
this function is disabled.
5.10 Port settings - Outputs
To change the settings for Output 0 for example, go to:
Config >> Ports >> Outputs >> Output 0
Settings„Output 0“
In this field you enter a name for the output. This name is then
displayed in the browser for Output 0.
The description entered in the
Text
field can for example
provide a more detailed description of the function or
installation location of the actuator.
In addition to the purely static switching of the outputs to ON
or OFF, the IP-Watcher also allows you to output pulses. This
means an output can be switched ON or OFF for a preset time,
returning to its rest state after the set pulse length.
For example, to configure Output 0 on the device to output
pulses, go to the navigation tree and select:
Config >> Ports >> Outputs >> Output 0 >> Puls
