W&T 58031, Manual

Page: 203 / 217

203
W&T
Appendix
Subject to error and alteration
3.) The transmission parameters are 9600 baud, 8 data bits, no
parity, no protocol:
4. After you have confirmed the settings with OK, you will
find yourself in the actual terminal window. All keyboard
entries are output thorugh the selected COM port. Now
turn the Com-Server on and off to reset it and while it is
starting up hold down the „x“ key (lower case, no Caps
L o c k ! ) . A f t e r a b o u t 2 - 3 s e c o n d s t h e p r o m p t
I P
no.:+<ENTER>: will appear in Hyperterminal.
5. Now enter the IP address you want to assign in the usual
dot notation (e.g. 172.17.10.10). There will be no
immediate echo of characters, so the individual inputs will
not be seen on the monitor. Only after you have pressed
Return to confirm is the completely entered IP address
returned by the Com-Server.
1
If you have made improper entries or typing mistakes,
the Com-Server will return
FAIL followed by its actual
current IP address. Step 4 must then be repeated.