59
W&T
WireGuard VPN server
Subject to error and alteration
7�2 Configuring the VPN environment
On the page
VPN settings -> VPN environment
the basic set-
tings of the
VPN server
and the activation of the VPN clients
are made.
Activate VPN
The check box activates the VPN server with the set parame-
ters on
Network 1
(yellow) of the Microwall VPN.
VPN server settings -> Public Key/New Key
The displayed public key of the VPN server must be known to
every VPN client and can be copied here from the text field,
e.g. into a file.
The button
New Key
generates a new key pair (private key and
public key) for the VPN server.
i
Within an existing VPN environment, the public key of a
newly generated key pair must be rolled out to all VPN
clients. Communication via the old key pair is no longer pos-
sible.
VPN server settings -> Virtual IP/subnet
The virtual IP address and subnet mask of the VPN server in
CIDR notation defines the NetID of the entire VPN. The IP ad-
dresses of all VPN clients must be located in the same subnet.
The IP range of the VPN must not collide with the address
Summary of Contents for 55211
