52
MN-111 | Instructions for Use | MN-111 W&H Med ENG Rev12 | 2019/08/31 | © 2019 W&H Sterilization Srl
Sterilization cycles
DELAY THE STERILIZATION CYCLE START
You may schedule the start of the sterilization cycles at a certain
date and time (e.g., if you want to load the sterilizer in the evening
and run standard sterilization cycle early the next morning before
office hours). You can set the cycle start date and time and enable
or disable it for each cycle.
1
On the homepage tap the cycle and
.
2
Tap Start cycle at.
3
If you want to change the start
time, tap the time or the date: a
settings page opens.
4
Tap the number you want to change
and tap
or
to increase it or
decrease it.
5
Tap
to confirm. This date and
time become the scheduled default
start time for all next sterilization
cycles.
6
Tap
to start the countdown for
the current cycle.
Note: You can decide to start the cycle
immediately or stop the countdown at
any time.
Summary of Contents for Lexa MN-111
Page 1: ...MN 111 Instructions for Use MN 111 W H Med ENG Rev12...
Page 2: ......
