background image

3

FCC/CANADIAN INFORMATION 

FCC ID:  UQXWRDR432 
MODEL: WRDR 
IC: 6809A-WRDR432 

This device complies with Part 15 of the FCC Rules and with RSS-210/Gen of Industry Canada. 
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference that may cause 
undesired operation. 

Warning: Changes or modifications not expressively approved by the party responsible for compliance 
could void the user’s authority to operate the equipment. 

The term “IC:” before the radio certification number only signifies that Industry Canada 
technical specifications were met. 

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 

This device must not be co-located or operating in conjunction with any other 
antenna or transmitter.

Summary of Contents for WRDR









Reviews: