WAMGROUP SILOTOP R03 Series Page 21 Installation, Operation And Maintenance Manual Download

Page: 21 / 64

4.0 INFORMATION REGARDING HANDLING AND TRANSPORT

SILOTOP R03

FIL.100.--.M.EN Issue: A2

06.12

7\SHRISDFNDJLQJ

7KH¿OWHULVVXSSOLHGRQDSDOOHWDQGSURWHFWHGZLWKDZRRGHQFUDWH

dimension in mm

Weight ith ooden

crate

837

914

1000

1100

1300

122

WAM s.p.a.

CAVEZZO

ØB

The signs for safe lifting and handling are shown on all packages.

The packaging material has to be disposed off or recycled in compliance with the standards in force.

A) Fragile:

indicates that the package has to be handled and lifted carefully to avoid

damage.

B) Centre of gravity:

indicates the position of the gravity centre of the package.

C) Harness:

indicates the correct harness position for lifting the package.

' 6WDFNLQJOLPLW

indicates the maximum stacking load of the packages.

E) Weight:

indicates the maximum weight of the package.

Summary of Contents for SILOTOP R03 Series

































































Search results

Summary of Contents for SILOTOP R03 Series

Reviews:

Related manuals for SILOTOP R03 Series

Brands by name

Popular brands

WAMGROUP SILOTOP R03 Series, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for SILOTOP R03 Series

Reviews:

Related manuals for SILOTOP R03 Series

Brands by name

Popular brands