1.0 GENERAL INFORMATION
SILOTOP R03
2
FIL.100.--.M.EN Issue: A2
06.12
6
For all technical assistance, contact the Manufacturer’s service network.
)RUDOOUHTXHVWVSURYLGHWKHHTXLSPHQWLGHQWL¿FDWLRQGDWDWKHW\SHRISUREOHPHQFRXQWHUHGDQGDOORWKHULQIRU
-
mation which could be useful for identifying the problem.
7KHFRQGLWLRQVIRUYDOLGLW\DQGDSSOLFDELOLW\RIWKHZDUUDQW\DUHVSHFL¿HGLQWKHVDOHVFRQWUDFW
7KHHTXLSPHQWLVGHOLYHUHGDFFRUGLQJWRWKHVSHFL¿FDWLRQVLQGLFDWHGE\WKH%X\HULQWKHRUGHUDQGWKHFRQGL
-
tions valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
equipment if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, main-
tenance etc. have not been carried out in compliance with the warnings described in this Manual, and in ac-
cordance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the equipment concerned is used:
- improperly;
E\XQDXWKRUL]HGSHUVRQVDQGRUSHUVRQVQRWVXI¿FLHQWO\WUDLQHGIRULQVWDOODWLRQRSHUDWLRQDQGPDLQWHQDQFH
ZLWKPRGL¿FDWLRQVPDGHWRWKHRULJLQDOFRQ¿JXUDWLRQZLWKRXWWKH0DQXIDFWXUHU¶VSHUPLVVLRQ
ZLWKVSDUHSDUWVWKDWDUHQRWRULJLQDORUDUHQRWVSHFL¿FIRUWKHPRGHO
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
equipment.
1.5 Request for assistance
1.6 Warranty
1.7 Exclusion of responsibility