Pre Assembly
Position press lock on the door
align with key hole and fix into
position using 4 x 10mm screws.
Then fit barrel bolts to top and
bottom of the door as shown in
diagram. Use 4x10mm screws
per barrel bolt.
Ensure doors open and close
freely.
12x10mm Screws
10mm
screw
Pre drill
hole
Drill a hole in the framing
above and below the door
for the tower bolt to fix
into.
Pre drill holes then fix Chrome
Handle using 35mm coach screw
as shown in diagram.
Pre drill
hole
35mm
bolt
25
23
27
4x35mm Bolt
Step 1
First assemble the two floor
panels as shown using
6x50mm screws.
Place floors on a firm and level
base, ensure base has suitable
drainage free from areas
where standing water can
collect. (See front page on
base requirements).
6x50mm Screws
6
5
a
a
a
a
a
a
2
1
2
Step 2
Fix the window panels and the
door panel at each corner
using 6x60mm screws as
shown in the diagram.
6x60mm Screws
Pre drill
hole
50mm
screw
Pre drill
hole
60mm
screw
P 3
Please retain product label and instructions for future reference
Wood is a natural product and is subject to movement
with changing weather conditions. It is important that
you fit the turn buttons and tower bolts as per the fitting
instructions.
