Step 7
layout the roof panels and
position them as shown in
diagram. Secure the panels
together using 6x50mm
screws.
* It is recommended to cut the
roof felt sheets before fixing
the roof to the building.
6x50mm Screws
Pre drill
hole
50mm
screw
7
8
Pre drill
hole
40mm
screw
Step 10
Secure the building to the
floor. Fix the panels 50mm
screws in alignment with the
floor joists.
20x50mm Screws
Pre drill
hole
50mm
screw
P 5
Please retain product label and instructions for future reference
Step 9
Place both roof sections on top
of building, ensure roof
framing slots over each side
equally all the way around.
Fix roof sheets into position
using 40mm screws ensuring
that they line up with the
vertical framing inside the
building and along the length
of the internal roof support
bar.
20x40mm Screws
19
18
31
Step 8
Attach the front and rear roof
framing to the roof as shown
in the illustration using 6x30mm
screws.
*Ensure to fix the framing the
opposite direction to the
roof bearers.
Fix the locating blocks to the
opposing sides to the roof
framing (
these blocks are to
help square the roof when
fitted
).
10x40mm Screws
40mm
screw
Pre drill
hole
