WALTIS Viva GT, Owner'S Manual For Maintenance And Safety

Page: 14 / 14

Valtis Ogrevanje d.o.o. Instructions for installers and maintenance workers
Dirt accumulated in the fan housing
The fan is malfunctioning
When the boiler overheated, the STB switch turned
off
THE FAN DOES NOT START
SCOPE OF WORK – SERVICE
CLEANING AND INSPECTION OF THE FIREBOX
- Clean the boiler walls under the wall coverings
- Clear the ashes
- Clean under the stainless steel grid
CLEANING AND INSPECTION OF THE HEAT EXCHANGER
- Clean the chamber walls
- Pipe clearance inspection
- Turbolator suitability inspection
CLEANING THE CHAMBER UNDER THE REGISTER CLEANING THE CHAMBER BELOW THE REGISTER
- Clean the chamber walls
- Clear the ashes
INSPECTION OF DOORS AND COVERS
- Inspection of insulation inserts
- Inspection and replacement of the sealing cord
- Check for leaks
INSPECTION OF CONTROL AND ELECTRONIC COMPONENTS
- Inspection of all electronic components
- Inspection of regulation and parameters
FAN INSPECTION
- Dismantling the fan, cleaning the fan blades
- Cleaning the Lambda probe
BELIMO ENGINES INSPECTION
- Cleaning the flap
- Inspection of the rotation, movement of the flap
INFORMATION
- All information is available at:
servis@valtis.si
- or by telephone: 00386 2 460 08 01
- All orders are executed with the completed attached document, to the following address:
servis@valtis.si
Unscrew the fan and clean it
Contact the service centre
STB switch deactivation