Rev. 1.1
Assembly Instructions - Full-Jet Valve VMS-05
Page 6 of 25
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
2.4 Correct Use
The
VMS-05
Hand Dosing Valve is suitable for the application of media such as sealants, adhesives, greas-
es, pastes and oils. Under no circumstance will aggressive media be processed! In case of doubt, please
contact the manufacturer if a certain medium is suitable for this device.
WARNING
Do not use solvents or cleaners from the chlorinated hydrocarbon group; for example,
1.1.1 trichloromethane or methylene chloride can react explosively with aluminum or
galvanized parts.
The
VMS-05 Special Design
valve is a needle valve and will be used for processing materials which can be
sprayed in continuous or intermitting operation. Under no circumstances shall aggressive media such as
acids, alkaline solutions, detergents, chemicals or others be sprayed. If you are not sure, please contact the
manufacturer if a certain spray medium is suitable for this device.
2.5 Incorrect Use
Operating the incomplete device with insufficient knowledge about the operation, maintenance and care
of the device.
Making changes, extensions or alterations on the incomplete device that may hamper its safety without
the prior consent of Walther Systemtechnik GmbH.
Operating the incomplete device with defective safety installations or not properly attached or malfunc-
tioning safety devices.
Using unsuitable materials.
Handling the incomplete device while energized
2.6 Qualifications of Personnel
Only trained and instructed personnel may conduct work on the equipment.
The responsibilities of the personnel for assembly work, operation, repair work or maintenance work must be
clearly assigned to individuals!
Persons in training may work with the equipment only under supervision of an experienced person.
Personnel
Task
Instructed
Personnel
Personnel with Technical
Qualification
Specialist Supervisor
Packaging, Transport
X
-
-
-
Commissioning
X
X
-
Operation
X
-
Troubleshooting, general
X
X
-
Troubleshooting
mechanical
-
X
-
-
Troubleshooting electrical
-
-
X
-
Setting up
-
X
-
-
Maintenance
-
X
-
-
Repair
-
X
X
-
Taking out of service,
Storage
-
X
X
-
