WALTHER PILOT V 20 664, Operating Instructions Manual

Page: 14 / 49

26 27
Replacement Parts - other than
given values of PILOT WA XV
Replacement Parts
PILOT WA XV needle-pull Type V 20 664
Item Part-No. Description
27-35 Parts not applicable
36 V 20 664 05 000 Piston End Nut
37 optional Material Needle
V 20 664 43 . . 3*
38 V 20 664 02 000 Stop Pin
39 V 20 206 04 000 Needle Spring
40 V 20 664 04 000 Adjustment Screw
41 V 20 664 03 000 Washer
42 V 20 679 85 000 Flat Washer
43 V 20 679 84 000 Serrated Lock Washer
44 V 20 660 41 684 Cylinder Head Screw
Replacement Parts
PILOT WA XV- HVLP Type V 20 672
2 optional Air Cap
for Nozzle Size
V 01 101 86 086* 0.3 - 2.0 mm ø
V 01 101 86 256* 2.5 - 3.0 mm ø
3 V 01 101 85 . . 3* Material Nozzle
11 V 20 671 01 000 Gun Body
20 V 20 671 32 000 Sealing Collar
30 V 20 664 05 000 Piston End Nut
37 optional Material Needle
V 20 664 43 033 0,3 ø for 0,3-Nozzle
V 20 664 43 053 0,5 ø for 0,5-Nozzle
for Nozzle Size
V 20 664 43 083* 0.8 - 1.5 mm ø
V 20 664 43 123* 1.8 - 2.0 mm ø
V 20 664 43 253* 2.5 - 3.0 mm ø
38 V 20 664 02 000 Stop Pin
39 V 20 206 04 000 Needle Spring
40 V 20 664 04 000 Adjustment Screw
41 V 20 664 03 000 Washer
42 V 20 679 85 000 Flat Washer
43 V 20 679 84 000 Serrated Lock Washer
44 V 20 660 41 684 Cylinder Head Screw
45 V 20 671 40 000 Middle-Air Regulat1on
* Please make sure to always quote the required size(s)
when placing an order for Replacement Parts! We re-
commend that BOLD-faced replacement parts (i.e.
wearing parts) are held an stock to avoid work stoppa-
ges.
Listing of Replacement Parts
for Model WA XV
Item Part-No. Description
1 V 01 101 03 000 Air Cap Nut
2 optional 6-Bore-Air Cap
V 01 101 02 . . 6*
other Air Cap Versions upon request
3 optional Material Nozzle
V 01 101 07 . . 3*
4 V 11 301 02 000 Air Distribution Ring
5a V 20 660 02 000 Gun Front Attachment
5b V 20 661 02 000 Gun Front Attachment
(Circulation Systems only)
6 V 09 001 72 000 Needle Seal Packing
7 V 20 660 05 000 Mating Bush
8 V 20 660 06 000 Compression Spring
9 V 20 660 07 000 Compression Gland
10 V 09 001 67 000 Seal
11 V 20 660 01 000 Gun Body
12 V 20 660 20 000 Flat-Jet Adjustment
compl.
13 V 20 660 08 000 Cylinder Head Screw
14 V 00 101 01 000 Double Nipple
15 V 09 002 07 000 Usit-Ring
16 V 20 660 04 003 Hexagonal Nut
17 V 20 201 02 000 Sealing Screw
18 V 09 102 02 000 O-Ring
19 V 20 660 42 000 Blanking Cap
20 V 20 660 32 000 Sealing Collar
21 V 09 102 11 000 O-Ring
22 V 20 660 33 000 Screw Plug
23 V 09 102 09 000 O-Ring
24 V 20 660 31 000 Control Piston
25 V 20 651 06 000 Sealing Collar
26 V 20 660 34 000 Backup Washer
27 optional Material Needle
V 20 660 51 . .3*
28 V 10 506 02 000 Needle Retaining Nut
29 V 20 651 07 000 Needle Spring
30 V 20 660 36 003 Piston End Nut
31 V 20 606 11 000 Piston Spring
32 V 20 660 35 000 Spring Retainer
33 V 20 660 37 000 Spring Bush
34 V 20 660 38 000 Spring Pin
35 V 20 660 39 120 Adjustment Screw
1 General
1.1 Identification of Model Version
Model:
Automatic Spray Gun PILOT WA XV
Type series: WA XV V 20 660
WA XV needle-pull V 20 664
WA XV-HVLP V 20 672
Manufacturer: WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327 Wuppertal
Tel.: 00 49 (0)202 / 787-0
Fax: 00 49 (0)202 / 787-2217
www.walther-pilot.de • Email: info@walther-pilot.de
1.2 Normal Use
The automatic spray guns of the WA XV type series are exclusively designed for use
with sprayable material types and grades. All wetted parts are made of stainless spe-
ciality steel so as to permit handling of hydrous and/or aggressive media such as, for
example:
• paints and lacquers
• greases, oils and corrosion preventives
• adhesive compounds
• ceramic glazes
• pickling solutions
If your specific material is not listed above, please contact us for further and detailed
information.
Please note that sprayable material may only be applied to workpieces and/or similar
items.
The temperature of the spraying material shall never exceed 80 degs. C.
The WA XV needle-pull gun is not designed for manual operation, but must be
installed in a suitable gun mounting device.
The term normal use also implies that any and all safety warnings, operational hand-
ling details, etc., as contained in these Operating Instructions, are carefully read,
understood and duly complied with.
This equipment complies with the explosion protection requirements of Directive 94 /
9 / EC (ATEX) for the explosion group, equipment category and temperature class
indicated on the type plate. When using the equipment, the requirements specified in
these Operating Instructions must be observed at all times.
The technical data indicated on the equipment rating plates and the specifications in
the chapter "Technical Data" must be complied with at all times and must not be
exceeded. An overloading of the equipment must be ruled out.
The equipment may be used in potentially explosive atmospheres only with the
authorisation of the relevant supervisory authority.