8
Figure 2
Figure 1
2.2 Battery
The LithiumIon battery included with your system does not need to be manually discharged.
Charge/Recharge Battery:
1. Turn off the blower if the battery is connected to the blower. (Note: the battery may be either
connected to or disconnected from the blower unit to recharge.)
2. Connect the charger to the battery (Fig.1).
Indicators on charger as follows:
Solid Red LED Charging
Solid Green LED Charge Complete
Flashing Red LED Fault (Section 2.12)
Battery Installation:
1. Line up the edges as shown (Fig. 2).
2. Slide the battery into the blower.
3. Make sure there is an audible click as the battery locks into the blower.
Insert Charger Lead into
Battery Connector
Charger
Battery
Connector
Battery