progress & innovation
Vers. 12.1
8
/
46
Coating:
Please control the external coating before you install the Walltherm, when you find defect
parts please contact immediately your reseller.
After the installation of the Walltherm we can only resolve the problem with sprays.
To avoid coating problems during the operation please take note of the following tips:
a)
Please clean the external parts only with water and soap, do never use alcohol or
similar agressiv cleaning liquids.
b)
To protect the upper side of the Walltherm® please close the exhaust fume flap
(5) when the gas temperature reaches about 300 - 350°C. (look chapter: 7 Using
the stove – Lighting)
Cooking plate and doors:
Because of the high temperature loading, the colour of the doors and the cooking plate
will change. When you grid of this parts you can get the origal colour.
1.i. The manufacturer’s liabilities
The manufacturer declines all civil and penal liabilities, direct or indirect, due to:
an installation that fails to comply with the laws in force in the country and with the
safety rules and regulations;
failure to comply with the instructions given in the manual;
an installation by unqualified and untrained personnel;
use that fails to conform to the safety directives;
alterations and repairs on the appliance not authorised by the manufacturer;
use of spare parts that are either not genuine or specific for this particular model;
lack of maintenance;
exceptional events.
1.j. User characteristics
The person who uses the stove must be an adult and responsible, with al the necessary
technical know-how to carry out routine maintenance of the mechanical and electrical
components of the stove.
Do not let children near the appliance to play with it when it is working.
1.k. Technical assistance
Wallnöfer H.F. GmbH is able to solve any technical problem concerning the use and
maintenance of the appliance’s whole life cycle. The main office will help you find the
nearest authorised assistance centre.
