Installation Steps
1. Turn off circuit breaker for stove circuit
2. To access stove power cord, pull stove away from wall
or remove stove drawer
3. Unplug stove power cord
4. Plug Smart Monitor into outlet then plug power cord
into Smart Monitor
5. Push stove back and ensure anti-tip bracket engages
or replace stove drawer
6. Turn on circuit breaker for stove circuit
7. Download Wallflower App from App Store or Google
Play and follow setup
Resetting To Factory Default
After setting up your Wallflower Smart Monitor using the App,
if resetting to factory default settings is ever required, simply
cycle your circuit breaker OFF and ON per the following:
1. Turn OFF circuit breaker
2. Turn ON circuit breaker, wait 5 seconds
3. Turn OFF circuit breaker
4. Turn ON circuit breaker, wait 5 seconds
5. Turn OFF circuit breaker
6. Turn ON circuit breaker
Your Smart Monitor will beep to let you know that it has
been reset and is ready for setup. If you have trouble factory
resetting your Smart Monitor, visit wallflower.com/support
Technical Specifications
Model No. WFA001
125/250V~ 4-wire, 50A, 14-50R
Model No. WFA002
125/250V~ 3-wire, 50A, 10-50R
Questions?
If you have questions or difficulties, please visit
wallflower.com/install or email [email protected]
WARNING
Turn Off Circuit Breaker Before Install
Smart Monitor (4-wire) installation shown
