30
Single
4-Way Slip-On
4-Way with U-Bolt Retainer
Fig. 15 WEDGES
7�
Wedge Configuration:
All Woodsplitters come from the factory
equipped with a single blade wedge�
An optional 4 segment wedge is available for
all splitter models (except the WX510)�
Horizontal splitters require a 4 segment
wedge which easily slips over the single
blade�
vertical / Horizontal models require a 4-way
wedge with a floating safety U-bolt retainer�
The 4 segment wedges can be used at any
time with smaller logs or pieces of wood�
A detailed installation instruction sheet is
included with each 4 way splitter kit�
See accessories page at the end of the manual
for ordering details or for replacement parts, go to
www�embmfg�com and click on "Parts and Manu-
als" to download the latest parts manual for you
model, then call your dealer to order�
8�
Operating Hints:
a� Hold the hydraulic lever in the wedge
extend direction until the wedge reaches
the base or the log/wood splits� Move
it in the opposite direction to retract the
wedge�
b� Always keep the working area neat and
clean to prevent tripping� Pile the split
and unsplit wood in piles close to the
working area� Do not allow pieces to
pile up and clutter the area� A cluttered
working area can lead to tripping and an
accident� Do not take chances with safety�
c� Do not place the splitter on muddy, icy, wet or
cluttered surfaces� each can lead to slipping
or tripping and cause accidents�
d� When machine is new lubricate the plate un-
der the wedge slider each time the machine
is used to improve wear and reduce friction
and/or binding� Once paint is worn off it will
polish itself�
e� ensure the back leg stand is secured before
converting the frame into the vertical con-
figuration�