29
6�
Converting for Vertical Splitting
Some models feature vertical splitting, these units
are designed with a pivoting latching splitter frame
that allows it to be used in the horizontal or vertical
configuration�
1� Before tilting the splitter frame, secure the
splitter beam stabilizer: loosen the turn
handle counter clockwise, lower the stabilizer
and secure it with the turn handle�
2� While standing beside the controls, release
the splitter beam by pulling the spring
loaded frame latch outward�
3� At the same time grab the cylinder end and
tip the splitter beam ass'y up towards the
vertical position�
4� Continue tipping, while placing your foot on
the hydraulic tank / axle as a brace, until
splitter is in the full vertical position�
Turn handle
clockwise to
tighten
Stabilizer and
support leg se-
cure in position
Pull frame
latch out to
release splitter
beam
Fig. 14 VERTICAL SPLITTING
