Operating Instructions
WP1624 Series
Firewood Processor
48
9.4 Infeed Conveyor
The infeed conveyor moves the log to the saw.
IMPORTANT! Before advancing the log, always make
sure saw is raised FULLY. Running the log into the saw can
damage it.
00396
Fig. 46 –
Infeed Conveyor Control Valve
•
Push the control valve handle down to advance the log up
to the
Log Stop Guide
.
•
If reversing the log is required, push the lever upward away
from the operator.
00397
Fig. 47 –
Advance Log
00398
Fig. 48 –
Log Stop Guide
9.5 Top Roller
A hydraulic motor powers the top roller to work in series with
the infeed conveyor. It assists feeding logs into the saw and
starts and stops with the infeed conveyor.
00408
Fig. 49 –
Powered Top Roller
•
Clamp the Top Roller down on the log by pulling the handle
down to horizontal.
01383
Fig. 50 –
Top Roller Clamped onto Log
The arm provides some down force on the roller to
hold the log as saw cuts are made. The roller follows
the contour of the log as it is advanced on the Infeed
Conveyor.
•
When starting a new log, push the lever back up vertical.
Summary of Contents for P3 PULSE WP1624
Page 87: ......
Page 88: ...WallensteinEquipment com...
