
Pre-Start Checklist
WP1624 Series
Firewood Processor
42
8. Pre-Start Checklist
Efficient and safe operation of the Wallenstein firewood
processor requires understanding operation and safety
precautions outlined in this section.
Follow the pre-operation checklist for personal safety and to
keep the machine in good mechanical condition.
Before operating the firewood processor, check the following
areas:
Area to check
Check and lubricate the machine per the schedule outlined
in the Maintenance Section. See page
Check the splitting wedge and block. Inspect for damaged
or broken components and excessive wear. Lubricate,
repair, or replace as required.
Check the saw chain. Look for broken or worn parts.
Check the bar guide and chain tightness.
Inspect the conveyor, infeed conveyor and live deck
chains. Tighten chains if necessary. Look for broken or
worn parts.
Check and ensure that all covers, guards and shields are in
place, secured and functioning as designed.
Check and tighten all fasteners. Make sure equipment is
working and in good repair.
Check for hydraulic leaks. Tighten fittings or replace
components to stop leaks.
Make sure there is bar oil in the reservoir.
8.1 Before Starting the Engine
CAUTION!
Hearing loss hazard. Prolonged
exposure to loud noise may cause
permanent hearing loss. Use suitable
protection while operating the
machine.
W016
The operator has the responsibility of being familiar with and
following all operating and safety procedures.
Although this machine is easy to use, each operator should
review this section to get familiar with the detailed safety and
operating procedures.
1.
Make sure the machine is set up correctly. See page
2.
Check the engine oil level. See page
3.
Check the hydraulic oil level. See page
4.
Check the fuel level. See page
.
5.
Check the bar oil level. See page
6.
Review the Safety Rules on page
Make sure
each operator is trained and familiar with the set up and
operation of the machine. Review the Controls (see page
7.
Clear the area of bystanders.
Summary of Contents for P3 PULSE WP1624
Page 87: ......
Page 88: ...WallensteinEquipment com...