WP1624 Series
Firewood Processor
Conveyor Setup
41
00386
Fig. 35 –
Conveyor Hand Winch
7.3.1 Raise the Conveyor
Turn hand winch clockwise to raise the conveyor.
7.3.2 Lower the Conveyor
1.
Turn the hand winch counterclockwise to lower the
conveyor.
2.
When the conveyor is at the required height, turn the hand
winch clockwise until you hear two clicks. This engages the
hand-winch brake.
7.4 Set the Conveyor Angle
This section applies to a 12 ft conveyor only.
1.
Remove the snap lock pin.
2.
Push the conveyor to the required angle.
3.
Insert the snap lock pin to secure the conveyor.
00385
Fig. 36 –
Set the Conveyor Angle
7.5 Move the Conveyor Sideways
This section applies to a 24 ft conveyor only.
1.
Unload the conveyor.
Wait until the machine processes all the firewood.
2.
Stop the machine.
For instructions, see page
3.
For each wheel, remove the linchpin from the wheel
frame, and then pull the pin and rotate the wheel to the
perpendicular position.
4.
Move the conveyor to the new position.
5.
Block the wheels.
01209
Fig. 37 –
Rotating the Conveyor Wheels
Summary of Contents for P3 PULSE WP1624
Page 87: ......
Page 88: ...WallensteinEquipment com...
