56
9�1�3 LX SERVICE ILLUSTRATION
See Service Record Chart
This illustration shows the general location of service grease points for all LX Boom Grapple models. LX115
is shown but service information is applicable to both models.
6
12
5
4
3
7
2
1
8
9
10
11
14
15
13
16
17
Every 100 hrs or annually. wash and clean the boom
grapple, remove entangled material, small debris
On a regular basis
check all nuts, bolts
and screws and
ensure they are all
properly secured
Location
Left Stabilizer Arm
LX115 only
Left Stabilizer Arm Pivot
LX115 only
Left Stabilizer Cylinder Pivot
LX115 only
Right Stabilizer Arm
LX115 only
Right Stabilizer Arm Pivot
LX115 only
Right Stabilizer Cylinder Pivot
LX115 only
Main Boom Cylinder Pivot
Main Boom Arm Pivot
Main Boom Arm
Grease Points - 50 hrs or Annually
1
2
3
4
5
6
7
8
9
Location
1
Left Stabilizer Arm
LX115 only
2
Left Stabilizer Arm Pivot
LX115 only
3
Left Stabilizer Cylinder Pivot
LX115 only
4
Right Stabilizer Arm
LX115 only
5
Right Stabilizer Arm Pivot
LX115 only
6
Right Stabilizer Cylinder Pivot
LX115 only
7
Main Boom Cylinder Pivot
8
Main Boom Arm Pivot
9
Main Boom Arm
Grease Points - 50 hrs or Annually
50 hrs - Lubricate
gears
Chart below shows location of grease zerks on the LXT series booms. Note: On model LX95 locations 1
through 6 are removable pins, and should be lubricated every 100 hrs or annually.
