8.4 Replace the Engine Fuel
CAUTION!
Do not smoke or vape when you
handle fuel. Fuel vapours can explode
causing serious injury or death. Keep
sparks, flames, or hot components
away from fuel.
W027
WARNING!
Fuel and vapors are very flammable and
explosive. Fire or explosion can cause severe
burns, bodily harm, or death. Keep fuel away
from sparks, open flame, pilot lights, heat, and
any other source of ignition
CAUTION!
Fuel vapors are very toxic. Breathing fuel vapors
can cause irritation, illness, or unconsciousness.
Check the fuel level or add fuel to the engine
outdoors or in an area that has good air flow.
1.
Stop the machine.
For instructions, see
2.
Wait for the engine and fluids to cool.
3.
Remove the current fuel from the engine.
Operate the machine until the fuel tank is empty or drain the
fuel tank and properly dispose of the fuel.
4.
Add new fuel to the engine.
For instructions, see
Add Fuel to the Engine on page 29
.
5.
Carefully remove any spilled fuel, and then wait until any
remaining fuel dries.
6.
Tighten the fuel cap.
7.
Start the machine.
For instructions, see
8.
Wait five to 10 minutes for the fuel to go through the
engine.
9.
Stop the machine.
For instructions, see
BXT36S
Wood Chipper
Storage
43
Summary of Contents for BXT36S
