3. Safety Labels
WARNING!
Replace all safety labels that are missing,
damaged, or illegible. If a component is replaced
and it has a safety label on it, apply a safety label
to the new component. Operating the machine
with missing, damaged, or illegible safety labels
puts the operator at risk of serious injury or
death.
W100
Learn what the safety labels mean and know the safety hazards.
A safety label can be vertical or horizontal. Vertical safety labels
have a top panel and a bottom panel. Horizontal safety labels
have a left side panel and a right side panel.
The top or left side panel shows the safety alert (possible
hazard), and the bottom or right side panel shows the action
message (how to prevent illness, injury, or death).
Hazard
How to avoid the
hazard
Think SAFETY! Work SAFELY!
3.1 Replace a Safety Label
•
Always replace safety labels that are missing or have
become illegible. Replacement safety labels are available
from your local Wallenstein Equipment dealer or distributor.
•
Keep the safety labels clean and legible at all times.
•
When a part that has a safety label on it is replaced, the
correct safety label must be applied to the replacement
part.
3.1.1 Conditions
•
The installation area must be clean and dry.
•
The application surface must be clean and free of grease
or oil.
•
The ambient temperature must be above 50 °F (10 °C).
3.1.2 Tool
Use a squeegee, plastic card, or similar tool to smooth out the
label.
3.1.3 Procedure
1.
Identify the label location.
2.
Peel the label off the backing paper.
3.
Hold the label above the location where you are going to
apply it.
Align the edges of the label with an edge of the machine.
4.
Start at one edge and carefully press the center of the
adhesive side of the label onto the machine.
5.
Use an appropriate tool to smooth the label. Work from one
side to the other.
6.
If there are small air pockets:
a. Use a pin to pierce the air pocket.
b. Use a piece of the label backing paper to smooth the air
pocket.
Safety Labels
BXT36S
Wood Chipper
Safety
13
Summary of Contents for BXT36S
