Wallenstein BXMT Series, Operator'S Manual

Page: 32 / 48

7.3 Maintenance Schedule
Perform maintenance procedures at time shown or hour
interval, whichever comes first.
Every Use
Check engine oil and fuel levels.
Clear out any entangled material from chipper.
Every 8 hours or Daily
Perform Pre-operation check. See page 24
Check engine air filter. Refer to engine manual.
Check shredder blade function. —
Observe proper drive belt operation. See page 35
Every 50 hours or Annually
Check rotor blade sharpness. See page 37
Check ledger knife sharpness. See page 37
Check shredder blade sharpness. See page 39
Lubricate pivot points, hinges. —
Every 100 hours or Annually
Grease rotor bearings. See page 33
Check tire pressure.
Refer to specification on
tire sidewall.
Clean wood chipper. Remove any
entangled material, debris.
—
Check drive belt tension. See page 35
Service and Maintenance
BXMT3209
Trailer Chipper-Shredder
32