BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
Operating Instructions
47
10.
Open the lower roller clean-out tray located under the feed
rollers and carefully remove any debris. Close and secure
the tray.
00852
Fig. 60 –
Lower Roller Clean-out Tray
11.
Disengage the rotor lock, close the upper rotor housing.
Tighten the upper housing fasteners.
12.
Check that everyone is clear of machine before restarting
engine.
WARNING!
Machine shown with shields removed for
illustrative purposes only. Never operate
machine with shields removed.
W001
If the chipper is still jammed with material, see next steps.
Chipper Severely Plugged
The upper feed roller can be raised to clear the debris between
the input opening and the rotor. That material can then be pulled
back out of the feed table.
NOTE:
If chipper is equipped with the Hydraulic Feed Roller
Lift option, see page 41.
13.
Remove the Bridge Guard Cover to access the end of the
Toplink.
14.
Remove the pin and extend the Toplink out so the rod end
can be pinned to the Bridge.
1
2
Fig. 61 –
Connect Toplink to Bridge
1. Toplink
2. Bridge Guard Cover
