Controls
BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
26
5.3 Feed Roller Control Bar
WARNING!
Risk of serious injury or death. Keep hands, feet
and clothing away from feed rollers when the
chipper is operating. Do not climb onto the feed
table or hopper.
W023
To quickly stop the feed rollers in an
emergency situation, rapidly pull or push
the bar to its maximum position.
The feed roller bar remains locked in the
STOP position until it is released by the
detent reset handle.
The Feed Roller Control bar on the back of the hopper controls
the material feed into the chipper. The control bar has four
positions:
Stop–Forward–Reverse–Stop
. Decals on the side of
the feed table indicate feed control bar operation.
00125
Fig. 26 –
Feed Roller Control Bar Positions
Once moved into either Stop position, the bar is locked there
until the Detent Release Lever is pulled up to release it.
00816
Fig. 27 –
Detent Reset Lever
The control bar can be moved back and forth freely between
Forward (feed) and Reverse.
00820
