Wallenstein 3036A030 Installation Instructions Manual Download Page 7

Page: 7 / 16

Tieback Mounts

3036A030

Tieback Mount

Step 1

Align the two toplink (5) assemblies with the tieback-plate
connections.

The toplink assemblies must be perpendicular to the tieback-
plate connections. If required, move the toplink assembly
location on the main-base weldment (9). For instructions, see

Install the Toplink Assemblies on page 11

Step 2

Complete the following for each toplink (only the LH side is
shown):

Align the toplink (5) with the tieback-mount connection
holes.

Insert a hitch pin (7) through the toplink and tieback-
mount connection.

Insert a lynch pin (6) through the hitch pin.

The backhoe must have an SQ500 universal quick-attach plate
installed (not included). For instructions, see

SQ500 Universal

Quick-Attach Plate on page 9

Quick-attach plate item numbers are in brackets and defined
under

SQ500 Universal Quick-Attach Plate Parts on page 9

Connect a Quick-Attach Plate

Summary of Contents for 3036A030

















Search results

Summary of Contents for 3036A030

Reviews:

Related manuals for 3036A030

Brands by name

Popular brands

Wallenstein 3036A030, Installation Instructions Manual

Search results

Summary of Contents for 3036A030

Reviews:

Related manuals for 3036A030

Brands by name

Popular brands