Introduction
3036A030
Tieback Mount
2
Introduction
This tieback mount is designed to work with a Wallenstein
backhoe. The backhoe must have an SQ500 universal quick-
attach plate installed (not included).
Wallenstein backhoes are designed to work with a wide variety
of skid steers. This tieback mount provides a method to attach
and detach a Wallenstein backhoe to a New Holland® L223 skid
steer.
The tieback mount kit includes parts and hardware
that are shown under Tieback Mount Parts on page
4. Make sure that all the parts are present and
not damaged from shipping.
Following are two reasons that a skid steer tieback mount is
required:
•
To avoid inadvertent movement of the skid steer controls
while a person is on the backhoe.
•
To reduce pressure spikes in the hydraulic lines and prevent
damage to the hydraulic system.
Some of the illustrations in this instruction are general; however,
important features are detailed to assist with installation.
Before using, installing, or maintaining this
equipment, read and understand the safety,
operation, and maintenance information in the
backhoe Operator's Manual.
If you have questions or require assistance, contact your local
dealer, the distributor, or Wallenstein Equipment.
IMPORTANT! Installation may include metric or imperial
fasteners. See the bolt head markings to identify the bolt
type.
Metric
Imperial
Wallenstein Equipment Inc. • © 2021. All rights reserved.
No part of this work may be copied, reproduced, replaced,
distributed, published, displayed, modified, or transferred in
any form or by any means except with the prior permission of
Wallenstein Equipment Inc.
Table of Contents
Introduction .................................................................2
Safety ...........................................................................3
Safety Alert Symbol .........................................................3
Signal Words ...................................................................3
Safety Information............................................................3
Tieback Mounts ..........................................................4
Tieback Mount Parts ........................................................4
Tools Required .................................................................5
Install the Tieback Mount .................................................5
Connect a Quick-Attach Plate..........................................7
SQ500 Universal Quick-Attach Plate ........................9
SQ500 Universal Quick-Attach Plate Parts .....................9
Install a Quick-Attach Plate on a Backhoe.....................10
Install the Toplink Assemblies ........................................11
Adjust the Quick-Attach Plate Position ..........................13
Common Bolt Torque Values ...................................15
www.wallensteinequipment.com
Orientation
IMPORTANT! When describing directions in this instruction,
left-hand (LH) side, right-hand (RH) side, back, and front
are determined when sitting in the skid steer driver's seat,
facing the direction of forward (FWD) travel.
FWD
01681
