Safety
3036A030
Tieback Mount
3
Safety
Safety Alert Symbol
This Safety Alert Symbol means:
ATTENTION! BE ALERT!
YOUR SAFETY IS INVOLVED!
The
Safety Alert Symbol
identifies important safety messages
on the machine and in this instruction. This symbol means
be alert to the possibility of personal injury or death. Follow
instructions provided.
Signal Words
The signal words
DANGER
,
WARNING
and
CAUTION
determine
the seriousness level of the warning messages in this manual.
The appropriate signal word for each message in this manual
has been selected using the following guidelines:
DANGER –
Indicates an imminently hazardous situation that, if not avoided,
will
result in death or serious injury. This signal word is to be
limited to the most extreme situations typically for machine
components which, for functional purposes, cannot be shielded.
WARNING –
Indicates a potentially hazardous situation that, if not avoided,
could
result in death or serious injury, and includes hazards that
are exposed when shields are removed. It may also be used to
alert against unsafe practices.
CAUTION –
Indicates a potentially hazardous situation that, if not avoided,
may
result in minor or moderate injury. It may also be used to
alert against unsafe practices.
IMPORTANT
–
To avoid confusing equipment protection
with personal safety messages, the signal word IMPORTANT
indicates a situation that if not avoided, could result in damage
to property or the machine.
Provides additional information that is helpful.
Safety Information
WARNING!
Avoid the risk of personal injury or machine
damage! Read the backhoe Operator’s Manual
before using this equipment. Carefully read all
safety messages in the manual and follow all
safety signs on the machine.
WARNING!
Before installing this equipment:
• Position the backhoe and skid steer on dry,
level ground.
• Make sure the area around them is clear and
free of debris.
•
Turn off the skid steer engine, apply the
parking brake, and remove the key.
