Wallenstein 2E9US1116AS040088, Operator'S Manual

Page: 33 / 46

33
BXT Series
7.3 Maintenance Schedule
Perform maintenance procedures at time shown or hour
interval, whichever comes first.
Refer to your engine manual for engine maintenance.
As Required
Visually check drive belt tension.
Remove entangled material from chipper.
Check that all fasteners are tight.
Every 8 hours or Daily
Check engine oil level. See engine manual
Perform pre-operation checks See page 24
Every 50 hours or Annually
Clean engine air filter See engine manual
Check drive belt tension and sheave
alignment
See page 36
Check wheel lug nut torque See page 43
Check rotor blade sharpness. See page 38
Inspect battery —
Check ledger knife sharpness See page 39
Check twig breaker See page 39
Grease machine See page 34
Every 100 hours or Annually
Change engine oil See engine manual
Check tire pressure See rating on tire sidewall
Change engine air filter See engine manual
Clean machine. Remove debris and
entangled material.
—
Change fuel filter See engine manual