Controls
BXTR5224
Wood Chipper
22
4.1.3 Engine Start Switch
The Engine Start Switch has three positions—OFF, ON, and
START.
00116
OFF
ON
START
ENGINE SW.
Fig. 9 –
Engine Start Switch
OFF
– In the OFF position, there is no power to the
engine and fuel supply is turned off. Turn the switch
fully counter-clockwise to shut the engine off.
ON
– In the ON (run) position, the fuel supply solenoid
supplies fuel to the engine. The machine operates in
this position. In a starting attempt, pause briefly at ON
to power up system electronics.
START
– In the START position, the engine electric
starter is activated. When released, the switch spring-
returns to ON.
4.1.4 Engine Hours and Oil Level Alert
Refer to the engine manual for further information.
00372
1
2
Fig. 10 –
Engine Hours and Oil Level Alert
1. Engine Oil Level Alert Indicator Light (Red)
2. Engine Operating Hours
4.2 Discharge Chute
The discharge chute can be rotated 360°. It has a spring-loaded
latch that locks it in position.
1.
Lift the latch handle up to disengage the lock pin.
2.
Use grip handles and rotate the chute.
3.
Release the handles and lock the chute into position at the
nearest lock point.
1
2
3
00117
Fig. 11 –
Discharge Chute
4.3 Hood Deflector
The Hood Deflector is on the end of the discharge chute to direct
the chip output. The deflector is held in position by a slotted
position handle.
1.
Grasp the handle and lift slightly to clear the handle cogs.
2.
Move the deflector with the handle as required.
3.
Lock the deflector into position by lowering the handle into
one of the slots.
1
2
3
00118
Fig. 12 –
Hood Deflector
