BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
Service and Maintenance
53
00865
3
3
7
5
6
11
4
8
9
10
Location
Grease Points
– Every 50 hours of operation
or annually
3
PTO Shaft Shield
4
Rotor Main Shaft – Front
5
Upper Roller Bearing – RH
6
Lower Roller Bearing – RH
7
Roller Pivot Bushing – RH
8
Upper Roller Bearing – LH
9
Upper Roller Bearing – LH
10
Roller Pivot Bushing – LH
11
Rotor Main Shaft – Rear
IMPORTANT! Use a hand-held grease gun for all greasing.
Pump one shot of grease per fitting.
•
Wipe grease fitting with a clean cloth before greasing to
avoid injecting dirt and grit.
•
If fittings do not take grease, remove and clean them
thoroughly. Replace grease fittings as necessary.
Fig. 67 –
Grease Points – 50 Hours of Operation or Annually