background image

BX52R, BX72R, BX102R
3 PH Roller-feed Chipper

Controls 

37

01263

BX102R

Fig.  49 – 

Select Machine Screen

Machine Select screen

IMPORTANT!  Machine model must be selected during 
initial setup before operating the machine. 

Machine Select

 

must be done when the P3 PULSE is set up for 

the first time. Once you have selected your machine, P3 sets up 
the default settings for that model. 

• 

From the 

Settings

 

screen, use the Up   or Down   

arrows to navigate to 

Select Machine, 

then

 

press

 

 .

• 

Press the Up   or Down   arrows to find your machine 
model.

• 

Press 

 to save your selection and P3 returns back to 

Settings

 

menu. 

• 

Pressing   

Home

 icon exits to the 

Settings

 screen without 

saving your selection or changing any settings.

01236

SETTINGS

FEED SETTINGS

RESET DEFAULTS

DIAGNOSTICS

SELECT MACHINE

ENTER PASSWORD

01259

SETTINGS

FEED SETTINGS

RESET DEFAULTS

DIAGNOSTICS

SELECT MACHINE

ENTER PASSWORD

Enter Password

This password protected menu provides access to P3 program 
settings. This menu is only used by the factory for initial P3 
machine setup parameters.

Summary of Contents for 1102R215









































































Reviews: