wallbe GmbH – Paderborner Str. 76 – 33189 Schlangen
Tel: +49 5252 989440 Mail: [email protected]
25
6.0 Installation
6.1.1 Wall mounting
8.
Hold the cable holder at the desired installation position and mark the four
screwholes. (Distance between screwholes:
255mm x 255mm
).
9.
Use an 8mm driller to screw the mounting holes into the wall. Use an 8mm dowel
for each of the screw holes.
10.
Remove the Protection film from the adhesive tapes on your aluminum mounting
frames and place them horizontally onto your
wallbe Pro.
Please make sure that
that the
mounting frame holes
and
wallbe Pro
mounting holes
are on top of each
other.
11.
Mount your wallbe Pro, including the mounting frames and cable holder, onto the
wall.
12.
Connect the supply line according to your
wallbe Pro model. Please follow the
instructions in chapter “5.1 Supply line connection”.
13.
Remove the Protection film from your
wallbe Pro cover
14.
Mount the wallbe Pro cover on your charging station using the holes on the
mounting frames.
