wallas XC Duo, Installation, Operation And Service Instructions

Page: 28 / 44

Operation
en
First start-up
After installation or maintenance, if the fuel line is empty, the heater may not start
DWWKHWKH¿UVWDWWHPSW6WDUWXSSKDVHZLWKHPSW\IXHOOLQHLVORQJHUWKDQQRUPDOO\
and might take about 15 minutes. If the heater doens’t ignite the red combustion
indicator light will start to blink after start-up.
Turn off the heater. The device cannot be restarted until the cooling phase is com-
pleted.
:KHQWKHFRROLQJSKDVHLV¿QLVKHGVZLWFKWKHKHDWHURQDJDLQ
If the device does not start after two attempts, it cannot be started again: the heater
will lock itself (lights blink to indicate this). Find out the reason why the unit didn’t
start.
If the heater iginites during two attemps the red combustion indicator (1) will go on.
After locating the fault, release the locking (instructions in the maintenance section)
and start-up the unit.
Depending on the length of the fuel hose, the heater may have to be started up
several times during priming. Keep an eye on how the fuel travels in the fuel hose
while starting up the heater.
Run the device for c. 1-2 hour to allow possible installation and manufacturing
greases to burn off. Make sure there is enough ventilation.
Normal Use
The power is adjusted manually. The cooker will always ignite in manual mode.
After the ignition power can be adjusted step-less with the power control (2) knob.
Avoid turning the power control knob rapidly back and forth, this may cause the
burner to become sooty.
When using as a stove, make sure that the thermostat indicator light (5) is not on.
Cooker used as a heater, thermostat use
5HTXLUHVDKHDWEORZHUOLG
Automatic power adjustment, thermostat controlled adjustment.
Is used only with a heat blower lid when the lid is folded over the ceramic top.
The function can be activated/deactivated whenever wanted. Turn the power con-
WURONQREWRSRVLWLRQVPLQPD[PLQPD[ZKHQ\HOORZKHDWLQJLQGLFDWRULVRQ
WRDFWLYDWHWKHIXQFWLRQ$VDFRQ¿UPDWLRQRIWKHPRGHFKDQJHWKHWKHUPRVWDWOLJKW
(5) will be lit.
:KHQWXUQLQJDJDLQWKHSRZHUFRQWURONQREPLQPD[PLQPD[WKHWKHUPRVWDW
light (5) will go off and the unit returns to manual mode.
After the cooker has passed the ignition phase, the temperature is adjusted by
WXUQLQJWKHSRZHUFRQWURONQRE7KHSRZHUFRQWURONQRELVWXUQHGWRWKHUHTXLUHG
position.
:KHQWKHWKHUPRVWDWOLJKWLVEULJKWWKHWHPSHUDWXUHLVEHORZWKHUHTXLUHGWHP
-
SHUDWXUH±WKHHIIHFWLVLQFUHDVHG:KHQWKHWKHUPRVWDWOLJKWGLPVWKHUHTXLUHG
temperature is achieved.
en
D30101D
- 64 -
XC Duo
490541G