Problem: “I have a flickering yellow light and the unit won’t do
anything.”
Solution: The control panel has determined that the voltage is
insufficient for starting. Check all the power wire connections all along the
main power leads and inside the cage on the DU model. Test for voltage
at the unit and charge your battery as necessary.
While it is not a permanent solution, you may try starting your main
engine and then start the stove while the main engine runs. If the stove
starts successfully, wait five minutes and then stop your engine. Wallas
devices require more voltage/amperage to start than they do to run. If
you continue running your Wallas, take care not to run your battery(s) so
low you can’t start your engine!
SUMMARY
We here at Scan Marine hope this supplement will help you with a trouble-
free installation. We know that in theory the installation of Model 85 does
not require any special skills or tools for installation, but we also recognize
that some meaningful time spent in planning your installation, along with a
good measure of patience, some care, and a few specialized tools will
usually insure quick success in using this unique and most remarkable
product.
Should you need any additional assistance with the installation, or have
any questions about operation or maintenance of the Model 85 please
feel free to contacts the staff during business hours by phone at (206)285-
3675 or our toll free number below.
HAPPY BOATING
2144 Westlake Avenue North, Suite D
Seattle, Washington 98109
Phone: 206.205.3675 Toll Free: 1.888.606.6665 Fax: 206.285.9532
© 2011 Two Mac Inc.
