In most cases the 85D has been sold in North America fitted with the 270
blower lid, a significant improvement over the 25 lid, with variable blower
speed to match combustion power level. Both the 95 and 85 have been
made available in DU (flush mounted) and DP (countertop mounted)
versions. The DP models are essentially DU models mounted in an
aluminum enclosure that can sit on top of a counter or table.
TIPS TO INSURE SUCCESSFUL INSTALLATION
In addition to the instructions supplied with your model 85D, please follow
these easy, extra steps during your installation.
PRIOR TO INSTALLATION
1.
Please assemble this short list of tools and keep them handy for
installation and future repairs and maintenance:
(1) 12mm end wrench;
(1) #2 Phillips driver;
(1) 1/8” blade slot driver;
(1) small adjustable wrench or vise grip.
2.
Take the time to verify that ALL electrical connections on the
underside of the cook-top are secure and tight. The units are
manufactured in Finland and have traveled many miles and
handled many times before your purchase. Things can, and often
do “get loose.”
3.
Make sure the two set screws holding the white “male” plug on the
main power wires are tight
4.
On units built prior to 2008, the small black plug from the lid blower
assembly must be oriented correctly and inserted fully until it “clicks”
into position in the back of the stove section. The small clip that
holds the power cord securely into the receptacle is always in the
DOWN position. Lids built in 2008 and later do not use this cord and
plug, the lid being captive to the lower assembly (lid not
removable).
