10
Product Maintenance
Warning:
Before cleaning or performing maintenance of the
WalkStation, be sure to remove the power plug.
Cleaning: Full cleaning will extend the life of the Walking Treadmill.
Remove dust to keep parts clean. Be sure to clean the exposed parts of
both sides of the running belt, which will reduce the accumulation of
impurities. The surface of the running belt can be cleaned with a damp,
soapy cloth. Be careful not to spill water on the electrical components and
underneath the running belt.
Warning:
Be sure to remove the power plug of the Walking Treadmill
before moving the front guard. Open the front guard at least once a
year to clean the motor vacuum.
Running belts and electric running lubricants
This Walking Treadmill has been pre-lubricated between the running
plate and the running belt. The friction between the running belt and the
running plate has a great influence on the service life and performance
of the Walking Treadmill. Therefore, it must be regularly lubricated. We
recommend regular inspection of the board. If the board is damaged,
please contact our customer service center.
We recommend to lubricate the Walking Treadmill between the running
belt and the running board according to the following schedule:
Lightweight users (less than 3 hours per week) - once a month;
heavyweight users (more than 7 hours a week) – once every two weeks.
1. In order to better maintain your Walking Treadmill and extend the life
of the machine, we recommend that you turn off the power and allow
the machine to rest for 10 minutes after 2 hours of continuous use.
2. If the belt is too loose, there will be slippage when walking; if it is too
tight, it may reduce the performance of the motor and increase the
wear of the roller and running belt. When the running belt has the
correct tension, the walking belt can be lifted from the running board
about 50-75mm by hand.
Adjustment of running belt - centering and tightness
In order for the Walking Treadmill to be working optimally, it may be
necessary to adjust the running belt from time to time.
Running belt centering
•
Put the Walking Treadmill on flat ground.
•
Operate the Walking Treadmill at a speed of approximately 2-3 km per
hour.
Summary of Contents for 470
Page 11: ...13...
