7
Armrest
Calories/
Distance
Motor
Time/Speed
Foot Folding Switch
Foot Folding Switch
Assembly
1. Read assembly instructions carefully before you install.
2. Take out all the packaging components and place them on a clean
floor. This will make it easier for you to check and the assembly easier.
3. Carefully check all parts have been received as listed in the packing list.
4. When unpacking, please use the
foot pedal (foot pedal folding switch)
to open the armrest according to the
diagram below. Test that the armrest
is firmly in place.
5. When you need to fold and retract
the armrest, use the foot pedal
(foot pedal folding switch) to
hand-hold the armrest and fold
it back as shown in the image.
Storing the Walking Treadmill
When moving your Walking Treadmill, ensure the
armbar is folded down and locked into position.
Once it is securely locked into position, you can tilt
the Walking Treadmill upwards and use the wheels
located underneath the motor/display to wheel, using the locked
armbar as a handle
The Walking Treadmill can be folded and placed upright to save space.
Turn off the power switch and unplug the power plug. Tilt the Walking
Treadmill so it does not fall down.
Using the Walking Treadmill
1. Plug in the power, turn on the red switch. You will hear a beep and the
screen will light up.
Manual speed control
Start operation:
In the standby state, attach the magnet on the red
security lock onto the receiving magnet located in the middle of the
armbar, press the power button on the remote control, the machine will
start at the lowest speed.
Speed increase / speed reduction:
press the + button on the remote
control while you are walking to increase the speed at 0.1Km/s. To
decrease the speed, press the - on the remote control. The machine will
decrease speed at 0.1 km / time.
Summary of Contents for 470
Page 11: ...13...
