1
16
(2) FLAP Setting
(3) AUX2 Setting
Press DN and R or L to choose "FLAP ACT". Setting:
(1) Press DN and R or L to choose "AUX2" to the default
gimble Tilt control;
(2) Press DN and R or L to choose "GEAR" to the custom video control.
After finish
setting, press ENT to confirm and EXT to back to Main Menu.
Press ENT to enter the Main Menu, press UP or DN until FUNCTION starts to flash, then press ENT to access
the function menu. Press UP or DN until REVSW starts to flash. Press ENT to display the channel name and the
reverse status. Press R or L to change between NOR and REV settings. Press DN to display each channel AILE,
THRO, RUDD, GEAR, FLAP, AUX2 and their corresponding reverse setting. Set each channel as shown in the
table below. Once complete, press ENT to confirm and EXT to go back to
the previous menu.
Transmitter
Setting
10
MODEL
FLAP
AUX2
MODEL
FLAP
ACT
MODEL
FLAP
GEAR
MODEL
AUX2
FMD
MODEL
AUX2
ACT
FUNCTION
ELEV
NORM
Press DN and R or L to choose "AUX2 FMD";
Press DN and R or L to choose "AUX2 ACT",
and press ENT to confirm. Press EXT to exit
to the main interface.
10.3.7 Reverse Switch(REVSW)
ELEV
NORM
AILE
NORM
THRO
NORM
RUDD
GEAR
NORM
FLAP
NORM
AUX2
NORM
NORM