19
1) Manual Landing or AUTO Landing: or Returning function landing, lock the motor after landing.
1) Small parts ,such as cables and straps, are dangerous if swallowed.
Keep all parts out of reach of children and animals.
2) For long-term storage or long-distance transportation, be sure to empty the remaining fuel in the fuel tank.
3) Store the flight in a cool, dry place at -20 ° C to 40 ° C.
2) Turn off the engine
(For details on the operation methods, see 11.3 Remote Control Combination
Function Comparison Table).
3) Disconnect the aircraft from the power supply and then turn off the remote controller.
After continuous flight, the engine system needs to be cooled. Therefore, after the landing, turn the
left
and right sticks
of the remote controller to the “
Engine idling
” position for 30 seconds.
Turn the
left and right sticks
of the remote controller to the “
Close Engine
” position and the engine
system will automatically turn off.
15.0 End flight
18.0 Engine M aintenance and Warranty
18.1 Engine M aintenance
1) The engine is a high-performance two-stroke engine,
which will cause some parts easy to spoil, such as
bearings, ball bearings, pistons, piston rings, spark plugs,
air filters, etc. The degree of wear and tear of parts varies
according to personal usage habits, environment and
temperature. We recommend that you send them back to
the original factory regularly to replace the wear and tear products.
2) Plug and air filter regularly with carburized oil cleaner.
3) The engine must periodically check whether there is leakage
at the surface joints (Cylinder, crankcase, oil seam joints).
Leakage will cause fuel/air ratio error, which will affect the
performance of the engine or cause damage.
4) The manufacturer suggests that the user should maintain it on his own (altogether 100 hours ) regularly,
and return to the factory for full maintenance once altogether reach 300 hours. The cost of maintenance for
each manufacturer is about USD500.
5) The engine is a liquid-cooled engine. The coolant liquid tank and the liquid-cooled device must be guaranteed
to flow smoothly and the pump can run normally. (Can use car coolant liquid)
a
e
f
g
b
c
d
a
b
a. Cooling
cylinder cover
b. Spark plug
c. Nozzle
d. Air filter
e. Silencer
f. Casing
g. Generator
1) In case of non-working condition or transportation, it is necessary to empty the remaining fuel in the fuel tank.
2) The aircraft is suitable for storage in an environment of -20 ° C to 40 ° C. (There is no fuel in the fuel tank).
3) Inspect the aircraft every 100 flights or after flying for over 20 hours:
a. check for and replace worn propellers.
b. Check for loose propellers. Replace propellers and propeller washers if needed.
c. Check for aging plastic or rubber parts.
16.0 Aircraft Storage and Transportation
17.0 Aircraft M aintenance and M aintenance
Walkera All Rights Reserved
Quick Start Guide
1
2
