![Walkera QL 1800 Quick Start Manual Download Page 13](http://html1.mh-extra.com/html/walkera/ql-1800/ql-1800_quick-start-manual_3207911013.webp)
13
11.4 GPS Indicator Lights
11.3 Engine start
Before starting, check whether the intake filter element is blocked and whether the ex haust
bolt is tightened.
N ever disconnect the aux iliary battery of the aircraft after the engine is started.
After the engine is turned off, the aux iliary battery of the aircraft can be removed.
1) Put the
left and right stick
of the remote controller to the “
Engine idling
” position to lighten the fire.
If it does not catch fire, it is suggested that the engine should be put in the "
Close engine
" position first,
and then in the "
Engine idling
" position again (the first start or long time may not require more than one
operation), and the engine will run for 1-2 seconds and automatically extinguish.
After ex tinguishing, turn off the engine.
2) After the fire is successful, turn
the left and right stick of the remote controller
to the "
Running
"
position and stabilize the engine for a few minutes.
Contrast Table of Left and Right stick Combination Function of Remote Controller
Engine idling
Running engine
Close engine
Stick
position
Function
American hand
(Left hand throttle)
J apanese hand
(Right hand throttle)
Blue LED lights flash
Indicates that the GPS signal has been received, and the APP shows the number of
satellites. (there will be prompts on the APP interface)
Walkera All Rights Reserved
Quick Start Guide