English
- 12 -
teletext transmission, no information will be displayed.
• When “
” button is pressed while in teletext mode,
the screen will be splitted into two windows, one
displaying the teletext and the other displaying the
current channel. Press “
TV
DTV
” button to exit from
teletext.
• Press “
” button once to switch PAT mode. Press
again to exit.
Note:
If the signal becomes insufficient, the teletext
mode will be quitted.
Fastext
Your TV supports the 1000 page Teletext system.
When the page number of any of the 1000 pages in
memory is entered, the system will not search for the
requested page; instead it will display the page auto-
matically. If the requested page is not in memory, the
system will search for the requested page number
and save the 1000 pages including the requested
page into memory after finding it.
• Press the
button to move the Teletext screen
forward one page at a time.
• Press the
button to move the Teletext screen
backward one page at a time.
For Fastext
The subject-heading for the information may have a
particular colour.
• Press an appropriate
RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant page
quickly.
TOP text
TOP text mode of operation will be activated automati-
cally according to the transmission.
• If TOP text transmission is present, colour coded
buttons will appear in status row.
• If TOP text transmission is not present, status row
will not appear.
The subject-heading for information may be located in
colored box.
In Top mode the
“-P”
or
“P+”
commands will request
the next or previous page respectively. If TOP text
transmission is not available, in case of operation of
these commands, wraparound occurs. For example
page 100 appears to be one greater than page 199.
Connect Peripheral Equipment
High Definition
Your LCD Television is capable of displaying High Defi-
nition pictures from devices such as a High Definition
Satellite Receiver or DVD Player. These devices must
be connected via the HDMI sockets or Component
Socket. These sockets can accept either 720p or 1080i
signals. Also, only HDMI modes accept 1080p signals.
Via The Scart
The TV has 2 Scart sockets. If you want to connect
peripherals (e.g. video, decoder, etc.) which have
Scart sockets to the TV, you can use SCART socket
of the TV.
Note:
If an external device is connected via the Scart
sockets, the TV will automatically switch to AV
mode. If both sockets are employed at the sime
time, SCART 1 becomes the preferential.
Via Aerial Input
If the device you want to connect does not have a
Scart socket, you should connect it to the Aerial input
of the TV.
If the VCR is connected via Aerial input, it is
suggested to use Programme 0.
Decoder
If you are subscribed to cable TV offers, the
organisation will supply you a corresponding decoder
unit to allow the programmes to be unscrambled.
For further information consult your dealer.
Connect a decoder with an aerial socket to
the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket
to the TV
• Connect the decoder to the EXTERNAL socket of TV
with a RCA cable. Through the SCART/RCA socket
of the decoder, you may attain a better display reso-
lution.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a Scart cable to
SCART
sockets.
Playback NTSC
• Connect NTSC VCR player to a Scart socket of the
TV.
Then, press the “
AV
” button to select EXT1 or EXT2.
ENG-52786W-MB26-1050UK-(W SUB-2SCRT)(3D PAN)(ECO PIP)(WO SVHS)(C2)-50133348.P6526.08.2008, 16:53
12
