background image

English   

- 18 -

•  For  16:9  aspect  ratio  pictures  that  have  been 

squeezed into a normal picture (4:3 aspect ratio), 

use  the 

16:9

  mode  to  restore  the  picture  to  its 

original shape.

4:3

Use to view a normal picture (4:3 aspect ratio) as this 

is its original size.

Panoramic

This  stretches  the  left  and  right  sides  of  a  normal 

picture  (4:3  aspect  ratio)  to  fill  the  screen,  without 

making the picture appear unnatural.

The top and bottom of the picture are slightly cut off.

14:9

This zooms up the wide picture (14:9 aspect ratio) to the 

upper and lower limits of the screen.

Cinema

This zooms up the wide picture (16:9 aspect ratio) to 

the full screen.

Subtitle

This zooms up the wide picture (16:9 aspect ratio) 

with subtitles to the full screen.

Zoom

This option zooms to the picture.

Note: You can shift to screen up or down by pressing 

“ ” / “ ” buttons while picture zoom is selected as 

panaromic, 14:9, Cinema or Subtitle.

Teletext

Teletext system transmits information such as news, 

sports and weather on your TV. Note that is the signal 

degrades,  for  example  in  poor/adverse  weather 

conditions, some text errors may occur or the teletext 

mode may be aborted.

Teletext function buttons

 are listed below:

” Teletext On-Off / PAT Mode

Activates teletext mode when pressed once. Pressing 

this button again will split the screen into two windows, 

one displaying the teletext and the other displaying 

the  current  channel.  Pressing  again  will  quit  the 

teletext mode.

” Index

Selects the teletext index page.

” Mix

Places the teletext screen over the programme.

” Expand

Press once to enlarge top half of the page, press again 

to enlarge the bottom half of the page. Press again to 

revert back to normal size.

” Reveal

Shows hidden information (e.g. solutions of games).

” Hold

Holds a text page when convenient. Press again to 

resume.

” Subcode Pages / Time

Selects subcode pages if available when the teletext 

is  activated.  When  the  teletext  is  not  activated, 

displays  time  info  if  the  programme  has  teletext 

transmission.

P+ / P- and numbers (0-9)

Press to select a page.

Note

: Most TV stations use code 100 for their index 

pages.

Coloured Buttons
(RED/GREEN/YELLOW/BLUE)

Your  TV  supports  both 

FASTEXT

  and 

TOP  text

 

systems.  When  these  systems  are  available,  the 

pages are divided into groups or topics.
When 

FASTEXT

 system is available, sections in a 

teletext page will become colour-coded and can be 

selected  by  pressing  the  coloured  buttons.  Press 

a  coloured  button  that  corresponds  to  with  your 

needs.

Summary of Contents for WP4084FHD


























Reviews: