Walker WP32NBLED, Operating Instructions Manual

Page: 8 / 37

English - 7 -
Viewing the Back side Connections
D
I
H
M
1
SPDIF
Coax.OUT
D
I
H
M
2
1. HDMI 2: HDMI Input
2. HDMI 1: HDMI Input
HDMI Inputs
are for connecting a device that has an
HDMI
socket. Your LCD TV is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI
connection.
3. RF Input connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
4. SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and
LCD TV and Operating Buttons
FRONT and REAR VIEW Control switch VIEW Control Switch
1. Up direction
2. Down direction
3. Programme/Volume / AV
/ Standby-On selection
switch
Note: You can move the switch,
upward or downward to change
the volume. If you want to change
channels, press the middle of the
switch once (Position 3) and then
move upward or downward. If
you press the middle of the switch
once more, source OSD will be
displayed. If you press the middle
of the switch and hold about a
few seconds, the TV will switch to
standby mode. Main menu OSD
cannot be displayed via control
buttons.